Ford Tri-Motor Pioneers Commercial Flight

Restored Ford Tri-Motor

In today's jetsetter world, commercial air travel is taken for granted by most people, but in the 1920s the aeronautics industry had to prove itself safe before Americans felt confident enough to board an airplane and leave terra firma. It was not until Henry Ford bought the Stout Metal Airplane Company in 1924 from designer and engineer William Bushnell that public confidence in air travel rose because of Ford's strong reputation for reliability in the automobile business.

Bushnell designed a three-engined transport plane based on an all-metal Dutch plane developed by the Fokker Aircraft Corporation (Fokker F.VII). While waiting to participate in an air show at the newly constructed Ford Airport in Dearborn, Michigan, the innovative Dutch plane was stored in a Ford hanger. Ford engineers surreptitiously measured its dimensions and plagiarized the design.

Ford Motor Company (FoMoCo) created a new aircraft division and kept Bushnell on as the president of Production in 1925. At a press conference, Henry Ford proclaimed "The first thing that must be done with aerial navigation is to make it fool-proof.... What Ford Motor Company means to do is prove whether commercial air travel can be done safely and profitably."

The plane was introduced for limited excursion service as the Ford Tri-Motor in 1926. Soon, the plane became popularly known as the Tin Goose or the Flying Washboard. Only one-hundred and ninety-nine were ever produced.

Ford Airport with Henry Ford Museum in the background.

The airplane's body was clad in corrugated aluminum alloy for lightweight strength, which regrettably resulted in air drag reducing the plane's overall performance. The original Tri-Motor was powered by three 200 hp Wright engines but was upgraded to 235 hp Wright engines, and upgraded again with 300 hp radial engines. The propellers were two-bladed with a fixed pitch. The maximum air speed of 132 mph was increased to 150 mph depending on the equipped engine. The plane had a low stall speed of 57 mph. The Tri-Motor could safely reach a height of 16,500 feet with a range of 500 miles.

The Ford Tri-Motor was a combination of old and new technologies. As was common in early wooden and canvas airplanes, the engine gauges were mounted onto the engine struts outside the cockpit, and the rudder and wing flaps were controlled by steel cables mounted on the exterior of the airplane. The plane soon developed a reputation for ruggedness and versatility. It could be fitted with skis or pontoons for snow and water takeoffs and landings. The seats also could be removed to carry freight.

External cables controlling wing flaps and tail rudder.

The Ford Tri-Motor pioneered two-way, air-to-ground radio communication with their planes while in flight. Once the Department of Commerce Aeronautics Branch developed the Beacon Navigation System, a continuous radar signal was broadcast from fixed beacon locations across the country. Navigators were able to determine a plane's relative bearings by radio impulse without visual sightings, helping pilots guide their planes to their next destination.

Ford Tri-Motors were equipped with avionics that helped establish air corridors and domestic routes coast-to-coast making reliable commercial flight possible. Pan American Airlines scheduled the first international flights with service from Key West to Havana, Cuba in 1927 using Ford Tri-Motors.

Transcontinental Air Transport pioneered the first coast-to-coast service from New York to California. Initially, passengers would fly during the day and take sleeper trains at night. The first commercial planes carried a crew of three (pilot, co-pilot/navigator, and a stewardess) serving eight or nine passengers. By August 1929, the planes had a passenger capacity of twelve which reduced leg room but increased profitability.

Admiral Richard E. Byrd and supply crew-1929.

To promote air travel and the reliability of air service, Henry Ford's son Edsel financed Admiral Richard E. Byrd's flight over the South Pole to the tune of $100,000. On November 29, 1929, Byrd became the first person to fly over both poles, creating more than $100,000 worth of domestic and international publicity for the Ford Tri-Motor. Byrd left the plane in Antarctica but upon Edsel Ford's request, he retrieved the plane in 1935 and had it shipped to Dearborn, Michigan for display in the Henry Ford Museum.

The Ford Tri-Motor became the workhorse for United States and international airlines. Known as the first luxury airliner, it redefined world travel marking the beginning of global, commercial flight. American Airlines, Grand Canyon Airlines, Pan American, Transcontinental Airlines, Trans World Airlines, United Airlines, and smaller carriers flew Ford Tri-Motors. A round trip excursion ticket from Ford Airport in Dearborn to the Kentucky Derby in 1929 cost $122 with one stop for fuel in Cincinnati.

Typical excursion advertisement to promote air travel.

The aircraft industry underwent rapid development in the 1930s when a new generation of vastly superior planes like Boeing's 247 and the Douglas DC-2 began to dominate the commercial aviation market. The Tri-Motor had declining sales during the Great Depression and was losing money, so FoMoCo closed its airplane division on June 7, 1933. The company chose to concentrate on its core business--automobiles. On a human level, the death of Henry Ford's personal pilot Harry J. Brooks during a test flight made Ford lose interest in aviation.

Originally designed as a civil airplane, the Ford Tri-Motor saw military service in World War II in the United States Army Air Force. It is believed only eight of these classic planes are airworthy today. In popular culture, it was a Ford Tri-Motor that appeared in the film Indiana Jones and the Temple of Doom leap-frogging across the map.

Ford's Willow Run B-24 Bomber Plant